Labels and Titles settings for DMS charts

Use the Labels and Titles node on the Settings tab to temporarily override the default settings for the display label and title options for all DMS chart types. An example of a display label is the label for the line representing control limits on a chart.

Note: Labels and Titles settings and all other settings in the Chart overrides node can be saved as a chart skin. See Chart Skins for more information.

 

Contents  [Hide]

 

Navigating to these settings

On the Settings tab

Navigate to the Labels and Titles settings following this path on the Settings tab by following this path:

Chart overrides | Labels and Titles

On the GainSeeker System Administration module to set default settings

Chart Titles

Designate up to three rows of titles to display above a chart. Expand the Chart titles node to display the label options.

The following examples show the settings for the three title lines and as the settings might display on the chart:

The top title row, which is often used for a company or department name or other display text.

  1. Right-click the Print title / Company name = option under the Settings tab Chart title tree node.

The Enter Value dialog opens.

  1. Enter a title in the text box field.

The middle title row, which is often used for statistics, chart type names ("Control chart," for example), or user-added text.

  1. Right-click the Title 2 = option under the Settings tab Chart title tree node.

The Define Chart Title dialog opens. See Using the Define Chart Title dialog.

The bottom title row, which is often used to display the chart type names ("Control chart," for example), statistics, or user-added text.

  1. Right-click the Title 3 = option under the Settings tab Chart title tree node.

The Define Chart Title dialog opens. See Using the Define Chart Title dialog.

Display limit and chart axes labels

Opt to always display limit and chart axes labels (regardless of chart window sizing), let the software decide the label size (based on chart sizing), or opt to never display labels. Double-click Display limit and chart axes labels to expand the node and display the options.

Limit labels

Change the labels used to designate the line limits on a new or existing chart. Short labels are recommended if you display more than one set of limits on a chart. Expand the Limit labels node to display the label options.

Note: For the Limit labels and data labels to display, the Always display labels or the Let software decide based on expected readability option under the Display limit and chart axes labels node must be selected. See Display limit and chart axes labels within this topic.

X-axis labels for control charts

Specify a date time format string for the X-axis when date labels are selected for the X-Axis. For example, you could change the format from Year/Month/Day to Month/Day/Year. See Date/Time Formats

Set the angle at which the X-axis labels display on a DMS Control chart. Expand the Label angle = node to display the label options.

Angle down was selected for the labels on the following chart example:

  1. Click the X-axis labels node to display the Label angle = option. Then, click Label angle = .

The Enter Value dialog opens.

  1. Click an option to select it. The word "Sample" will change to reflect the selected angle and the Label angle text box will display the degree of the angle.

Set the label display frequency on a chart. Expand the label frequency node to display the label options. The Label frequency setting only applies if the Label type value is set to Date or Traceability, but not to Count.

Select whether to label the X-axis by Count, Date, or a Traceability field. Expand the label type node to display the label options.

Set the display length for traceability labels. Expand the Options for traceability labels node to display the label options.

Note: For this setting to apply, the Label type must be set to Traceability. Expand the Display style node to display the label options.

Select a traceability field to display on the X-axis.

  1. Double-click Field to display =.

The X-axis labels dialog opens.

  1. Select a label from the Column to display list.

Select the number of characters to display for the X-axis value. Note: For this setting to apply, the Display style must be set to Use the first part of the traceability value or Use the last part of the traceability value. See Display style

  1. Double-click Length for partial display =.

The Enter Value dialog opens.

  1. Enter a numeric value in the Length for partial display text box representing the number of characters to display for the traceability value (30 or less).