OEE Statistics

 

Contents  [Hide]

 

Navigating to OEE Statistics settings

Follow this path to the OEE statistics settings on the Configurations tab of the System Administration module:

Configurations | "Configuration name" | Statistics | OEE

OEE settings

First of five traceability columns where OEE values are stored

Before drawing OEE charts, you need to designate five new traceability fields (table columns) in which to store the raw data values used to determine OEE.

Use this setting for that purpose. The first traceability field number must be 7 or higher.

For important information about using this setting, see Requirements for collecting OEE data.

Calculate OEE even if all three component values are not available

When this check box is selected (the default setting), GainSeeker can calculate the overall OEE statistic even when one or two of the three underlying statistics - OEE Availability, OEE Performance, and OEE Quality - is reported as "NA" ("Not Available" - meaning it cannot be calculated).

If you clear this check box, GainSeeker will only be able to calculate OEE when OEE Availability, OEE Performance, and OEE Quality can all be calculated.

Related topics