SPC Charts settings

Temporarily override the display settings for charts. System administrators can set default settings for charts in the GainSeeker System Administration module. See Chart Defaults settings

Note: Charts settings and all other settings located in the Chart overrides node of the Settings dialog can be saved as a chart skin that you can apply to any charts. For more information, see Chart Skins

Navigating to the settings

On the Settings tab

To temporarily override default settings, follow this path on the Settings tab:

Chart overrides | Charts

On the Configurations tab of the GainSeeker Administration module

Systems Administrators can set defaults for these settings following this path on the Configurations tab:

Configurations | (Configuration) | Chart defaults

These Settings also display on the SPC Chart Options dialog in Step 3 of 3

• See Setting Charts to display in inspections

For help with using expandable tree structures like the one featured here, see Navigating Tree Structures

Colors and Patterns

Set the colors or patterns for the many elements of a chart.

• See Choosing Colors and Patterns

Control chart options

Options for Control, Combination, X-Bar/Moving range/Range, Scatter, Trend, EWMA, Moving Average, Time Axis, and CuSum/Control charts.

• See Control chart settings for information on using these options.

Default reports

Use the Default Reports options to select statistics and other information to display with a chart.

• See Choosing Default reports options

Monitor Table

• See Monitor Table options

Multiple Charts

• See Multiple Charts options

Performance charts

Select options specific to Performance charts.

• See Performance Chart options

Real-time failure border

Set default options for colored chart borders that indicate the presence of real-time failures on those charts.

• See Real-time failure border settings

Show statistics list under chart

Select the checkbox preceding Show statistics list under chart to display a statistics list under a chart on a GainSeeker chart window.

• See Displaying Statistics with Charts for information on changing and selecting statistics to display with a chart or under a printed chart.

Note: GainSeeker automatically displays statistics under Combination and Performance chart types. After either of these charts are drawn, you can clear the checkbox preceding the Show Statistics list under chart setting to stop displaying the statistics on the open chart. Then, If you duplicate that chart to draw new charts, the new charts (except any Combination and Performance charts) will also not display statistics.

Skip single charts with no data

Select the checkbox preceding Show statistics list under chart so that charts will be drawn only for standards that have data. For example, if you select this option and you choose four standards for a retrieval of which only three have data, only three charts will be drawn.

• See Chart types for information on chart types for which this setting can apply.

If all SPC standards are selected, GainSeeker automatically analyzes the data as if this check box were selected.

Skip retrievals with no data on multiple charts

To hide data retrievals with no data from the following charts, select this checkbox:

• Multiple Charts

• Process Capability

• Statistics Table

• Multiple Data Table

• Combined Control Chart

If all SPC standards are selected, GainSeeker automatically analyzes the data as if this check box were selected.