Monitor Table

The Monitor Table displays individual SPC data records, with their real-time failure status, for multiple standards.


There are three ways to view the Monitor Table:

The Monitor Table takes the place of the legacy SPC Database Monitor module.

 

Contents  [Hide]

 

Retrieving data for the Monitor Table

To determine the data records that will be retrieved for the Monitor Table:

Unlike the legacy SPC Database Monitor module, this Monitor Table chart window does not use copies of data records from secondary database tables. It uses the same SPC data records that you analyze with other tools in the GainSeeker Charts module.

Settings specific to the Monitor Table

After GainSeeker uses the options listed above to retrieve data, it will use the following settings to determine how to display that data on the Monitor Table window.

All of these settings are maintained when the Monitor Table window is refreshed or stored in a desktop.

Monitor Table options

On the Settings tab, these can be found at Chart overrides | Charts | Monitor Table .

Table Mode

Maximum count for each standard

This setting only applies when the Table Mode (above) is set to All failures.

After GainSeeker applies this setting to reduce the number of rows displayed, it will then fill the Monitor Table (up to the number of rows specified by Maximum count for retrieval).

Columns displayed on the Monitor Table

On the Settings tab, this is found at Chart overrides | Charts | Default reports | Monitor table columns .

For information on setting or changing the column report for the Monitor Table (or for a data table), see Using the Data Table columns dialog.

If the column report contains a Row column, then the Failure column for the Monitor Table will automatically be displayed after the Row. Otherwise, the Failure column will be the first column displayed on the Monitor Table.

Colors and Fonts on the Monitor Table

Monitor Table colors are defined by the real-time failure colors and priority settings in the System Administration module - regardless of the settings for Back color and Alternate row color (under Chart overrides | Fonts | Table fonts | Data Table).

Monitor Table fonts are defined by the settings for Font and Fore color (under Chart overrides | Fonts | Table fonts | Data Table). For details, see Fonts settings.

Using the Monitor Table

Standard charting tools

When the Monitor Table is displayed, you can use many of the tools that are available for a Data Table window or for other Summary Charts, such as:

* for a long list of standards, see this important note on SPC standards for Summary Charts.

To change the sort order of the table rows, click the column header by which you want to order the data. Click it again to reverse the sort (ascending or descending).

Viewing a Legend of failure codes and colors

The Failure column uses short codes to display all of the failures that occurred in each row.

For an explanation of these short codes, and the color that is set for each type of failure, right-click the Monitor Table window (or click the Options menu) and choose Legend.

(The legend does not indicate which color gets priority if one row exhibits multiple failures. For more information on finding this setting in the System Administration module, see Real-time failure colors and priority.)

Best practices for managing Real-time failures