OEE test

Property

Default setting or default display

Allows

APPEARANCE

Label

OEE.

This label is displayed at the top of this test and stored in the traceability field referenced by the Inspection property TraceabilityTest.

Enter text to change this label.

ShowColors

True. For the four OEE statistics that are calculated from the raw data being entered, set the background colors based on this configuration's Goal and Acceptable targets and  Colors (Above and below / Goal and Acceptable).

False. Do not display background colors on the calculated OEE statistics.

VerticalSize

Regular. Test is full-sized.

Short. Helps you to fit more tests on the screen. Test may be shorter, and white space above and below this test may be reduced.

BEHAVIOR & DATA

Data Entry Settings

By default, the five data entry fields are not Required (can be left blank), are Enabled for user interaction, and are not prefilled with any initial Prep Values.

To change any of these settings, double-click the OEE test or use the ButtonSettings property to open the OEE Data Entry Settings window.

DataStorage

DMSData. This test will store a DMS data record with the five data entry values stored as traceability, no defects, and the sample size set by the SampleSize property.

SubInspectionTrace. This test will set its five data entry values as traceability for any tests on this sub-inspection that store a data record (Defect List, Pass/Fail/NA, etc.) This is useful if you want to use one or more Defect List tests to store a combination of these OEE numbers and defect reasons for below-target Availability, Quality, or Performance.

DoNotStore. This test will not store a DMS data record or set traceability values for any other tests.

NoteButton

SameAsTest. If the sub-inspection ShowIndividualNote property is set to True (display Individual Note buttons), enabling this test for user interaction will enable this test's Individual Note button, and disabling this test from user interaction will disable this test's Individual Note button.

AlwaysEnabled. If the sub-inspection ShowIndividualNote property is set to True (display Individual Note buttons), this test's Individual Note button is always enabled, regardless of the enabled/disabled status of this test.

AlwaysDisabled. This test's Individual Note button is always disabled, regardless of the enabled/disabled status of this test.

OverridePartNumber

[blank]. If the DataStorage property is set to DMSData, use the DMS Standard that is set for the inspection or sub-inspection (e.g., by a DMS Standard test) to store the data record.

Select a different DMS standard. The OverrideProcess property determines which standards are listed for selection.

OverrideProcess

[blank]. If the DataStorage property is set to DMSData, use the DMS Process that is set for the inspection to store the data record.

Select a different DMS process.

SampleSize

1. If the DataStorage property is set to DMSData, use a sample size of 1 to store the data record.

Enter a different sample size. If left blank, this will use a sample size of 1.

TestID

A unique TestID number is automatically assigned to each test in the inspection, but you can change this number to a more meaningful name.

The TestID property is only used in Python scripts for PC Collect inspections.

For more information, see About the TestID property

Enter a name for the TestID.

TestSpecificTrace

[blank]

You can specify one or more traceability values that will be applied only to this test on this sub-inspection.

These values will not be displayed to the inspector during data entry.

If you want to store this test's TestID property as a traceability value, enter [testid] .

Any traceability values you set here will override values set by Traceability tests, Inspection properties, Planned Inspection traceability values, etc.